Página inicial Explorar Ajuda
Registrar Entrar
YJ2025020924
/
TMTT
1
0
Fork 0
Arquivos Issues 0 Pull Requests 0 Wiki
Tree: f37638e621
Branches Tags
TMTT
/
Model
/
Alarm.cs

Alarm.cs 29 KB
Histórico Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383 
  1. using System;
    2. 

  2. using System.Collections.Generic;
    3. 

  3. using System.Linq;
    4. 

  4. using System.Text;
    5. 

  5. using System.Threading.Tasks;
    6. 

  6. 

  7. namespace Model
    8. 

  8. {
    9. 

  9.     public enum AlarmType
    10. 

  10.     {
    11. 

  11.         Cleared=-1,
    12. 

  12.         Warning=1,
    13. 

  13.         Error,
    14. 

  14.         FatalError,
    15. 

  15.     }
    16. 

  16.     public class Alarm
    17. 

  17.     {
    18. 

  18.         public string AlarmMessage { get; set; }
    19. 

  19.         public AlarmType AlarmType { get; set; }
    20. 

  20.         public DateTime Timestamp { get; set; }
    21. 

  21. 

  22.         public static List<(string AlarmNode, string AlarmMessage, bool DesiredValue)> AlarmNodeWithMessage = new List<(string, string,bool)>
    23. 

  23.         {
    24. 

  24.             ("Application.Var_Hand_Turntable.b转盘轴Error" , "A00转盘轴Error" , true),
    25. 

  25.             ("Application.GVL_A01_Auto.b下压轴Error" , "A01入料站下压轴Error" , true),
    26. 

  26.             ("Application.GVL_A01_Auto.b分离轴Error" , "A01入料站分离轴Error" , true),
    27. 

  27.             ("Application.GVL_A04_Auto.b下压轴Error" , "A04转向站1下压轴Error" , true),
    28. 

  28.             ("Application.GVL_A04_Auto.b旋转轴Error" , "A04转向站1旋转轴Error" , true),
    29. 

  29.             ("Application.GVL_A05_Auto.b下压轴Error" , "A05测试站1下压轴Error" , true),
    30. 

  30.             ("Application.GVL_A06_Auto.b下压轴Error" , "A06测试站2下压轴Error" , true),
    31. 

  31.             ("Application.GVL_A07_Auto.b下压轴Error" , "A07测试站3下压轴Error" , true),
    32. 

  32.             ("Application.GVL_A08_Auto.b下压轴Error" , "A08测试站4下压轴Error" , true),
    33. 

  33.             ("Application.GVL_A09_Auto.b料盒轴Error" , "A09四排料盒1料盒轴Error" , true),
    34. 

  34.             ("Application.GVL_A10_Auto.b料盒轴Error" , "A10四排料盒2料盒轴Error" , true),
    35. 

  35.             ("Application.GVL_A11_Auto.b下压轴Error" , "A11定位站1下压轴Error" , true),
    36. 

  36.             ("Application.GVL_A15_Auto.b下压轴Error" , "A15加热盘下压轴Error" , true),
    37. 

  37.             ("Application.GVL_A15_Auto.b热测升降轴Error" , "A15加热盘热测升降轴Error" , true),
    38. 

  38.             ("Application.GVL_A15_Auto.b热测盘Error" , "A15热测盘Error" , true),
    39. 

  39.             ("Application.GVL_A15_Auto.b翻转升降轴Error" , "A15加热盘翻转升降轴Error" , true),
    40. 

  40.             ("Application.GVL_A15_Auto.b翻转轴Error" , "A15加热盘翻转轴Error" , true),
    41. 

  41.             ("Application.GVL_A20_Auto.b下压轴Error" , "A20降温站1下压轴Error" , true),
    42. 

  42.             ("Application.GVL_A21_Auto.b下压轴Error" , "A21降温站2下压轴Error" , true),
    43. 

  43.             ("Application.GVL_A22_Auto.b料盒轴Error" , "A22热测NG四排料料盒轴Error" , true),
    44. 

  44.             ("Application.GVL_A23_Auto.b下压轴Error" , "A23降温站3下压轴Error" , true),
    45. 

  45.             ("Application.GVL_A24_Auto.b下压轴Error" , "A24镭射打标下压轴Error" , true),
    46. 

  46.             ("Application.GVL_A24_Auto.b镭射盘Error" , "A24镭射盘Error" , true),
    47. 

  47.             ("Application.GVL_A26_Auto.b下压轴Error" , "A26定位站2下压轴Error" , true),
    48. 

  48.             ("Application.GVL_A27_Auto.b下压轴Error" , "A27测试站5下压轴Error" , true),
    49. 

  49.             ("Application.GVL_A28_Auto.b下压轴Error" , "A28转向站2下压轴Error" , true),
    50. 

  50.             ("Application.GVL_A28_Auto.b旋转轴Error" , "A28转向站2旋转轴Error" , true),
    51. 

  51.             ("Application.GVL_A29_Auto.b下压轴Error" , "A29 3D检测下压轴Error" , true),
    52. 

  52.             ("Application.GVL_A30_Auto.b料盒轴Error" , "A30 3D检测NG排料料盒轴Error" , true),
    53. 

  53.             ("Application.GVL_A31_Auto.b下压轴Error" , "A31封装1前定位站下压轴Error" , true),
    54. 

  54.             ("Application.Var_Hand_A33_Encapsulation1.b下压轴Error" , "A33封装1站下压轴Error" , true),
    55. 

  55.             ("Application.Var_Hand_A33_Encapsulation1.b封合轴Error" , "A33封装1站封合轴Error" , true),
    56. 

  56.             ("Application.Var_Hand_A33_Encapsulation1.b走带轴Error" , "A33封装1站走带轴Error" , true),
    57. 

  57.             ("Application.GVL_A35_Auto.b下压轴Error" , "A35封装2前定位站下压轴Error" , true),
    58. 

  58.             ("Application.Var_Hand_A37_Encapsulation2.b下压轴Error" , "A37封装2站下压轴Error" , true),
    59. 

  59.             ("Application.Var_Hand_A37_Encapsulation2.b封合轴Error" , "A37封装2站封合轴Error" , true),
    60. 

  60.             ("Application.Var_Hand_A37_Encapsulation2.b走带轴Error" , "A37封装2站走带轴Error" , true),
    61. 

  61. 

  62.             ("Application.Var_Auto_Turntable.b_Error[1]" , "A00主转盘下压轴不在位，无法移动" , true),
    63. 

  63. 

  64.             ("Application.GVL_A01_Auto.b入料站异常[1]" , "A01入料站门闸感应超时报警" , true),
    65. 

  65. 

  66.             ("Application.GVL_A02_Auto.bError[10]" , "A02正反检CCD返回EOT超时报警" , true),
    67. 

  67. 

  68.             ("Application.GVL_A03_Auto.bError[1]" , "A03 NG抛料材料未清除，需要手动清除材料" , true),
    69. 

  69. 

  70.             ("Application.GVL_A04_Auto.bError[1]" , "A04正反检转向站1材料未取走报警" , true),
    71. 

  71.             ("Application.GVL_A04_Auto.bError[2]" , "A04正反检转向站1材料缺失报警" , true),
    72. 

  72. 

  73.             ("Application.GVL_A05_Auto.bError[1]" , "A05测试站1材料未取走报警" , true),
    74. 

  74.             ("Application.GVL_A05_Auto.bError[2]" , "A05测试站1材料缺失报警" , true),
    75. 

  75.             ("Application.GVL_A05_Auto.bError[10]" , "A05测试站1测试机返回EOT超时" , true),
    76. 

  76.             ("Application.GVL_A05_Auto.bError[11]" , "A05测试站1返回Bin结果异常" , true),
    77. 

  77. 

  78.             ("Application.GVL_A06_Auto.bError[1]" , "A06测试站2材料未取走报警" , true),
    79. 

  79.             ("Application.GVL_A06_Auto.bError[2]" , "A06测试站2材料缺失报警" , true),
    80. 

  80.             ("Application.GVL_A06_Auto.bError[10]" , "A06测试站2测试机返回EOT超时" , true),
    81. 

  81.             ("Application.GVL_A06_Auto.bError[11]" , "A06测试站2返回Bin结果异常" , true),
    82. 

  82. 

  83.             ("Application.GVL_A07_Auto.bError[1]" , "A07测试站3材料未取走报警" , true),
    84. 

  84.             ("Application.GVL_A07_Auto.bError[2]" , "A07测试站3材料缺失报警" , true),
    85. 

  85.             ("Application.GVL_A07_Auto.bError[10]" , "A07测试站3测试机返回EOT超时" , true),
    86. 

  86.             ("Application.GVL_A07_Auto.bError[11]" , "A07测试站3返回Bin结果异常" , true),
    87. 

  87. 

  88.             ("Application.GVL_A08_Auto.bError[1]" , "A08测试站4材料未取走报警" , true),
    89. 

  89.             ("Application.GVL_A08_Auto.bError[2]" , "A08测试站4材料缺失报警" , true),
    90. 

  90.             ("Application.GVL_A08_Auto.bError[10]" , "A08测试站4测试机返回EOT超时" , true),
    91. 

  91.             ("Application.GVL_A08_Auto.bError[11]" , "A08测试站4返回Bin结果异常" , true),
    92. 

  92. 

  93.             ("Application.GVL_A09_Auto.bError[1]" , "A09测试NG抛料站NG抛料失败，需要手动清除材料" , true),
    94. 

  94.             ("Application.GVL_A09_Auto.bError[2]" , "A09测试NG抛料站NG抛料站材料缺失报警" , true),
    95. 

  95.             ("Application.GVL_A09_Auto.bError[25]" , "A09测试NG抛料站NG料盒1满料" , true),
    96. 

  96.             ("Application.GVL_A09_Auto.bError[26]" , "A09测试NG抛料站NG料盒2满料" , true),
    97. 

  97.             ("Application.GVL_A09_Auto.bError[27]" , "A09测试NG抛料站NG料盒3满料" , true),
    98. 

  98.             ("Application.GVL_A09_Auto.bError[28]" , "A09测试NG抛料站NG料盒4满料" , true),
    99. 

  99.             ("Application.GVL_A09_Auto.bError[31]" , "A09测试NG抛料站NG料盒1缺失" , true),
    100. 

  100.             ("Application.GVL_A09_Auto.bError[32]" , "A09测试NG抛料站NG料盒2缺失" , true),
    101. 

  101.             ("Application.GVL_A09_Auto.bError[33]" , "A09测试NG抛料站NG料盒3缺失" , true),
    102. 

  102.             ("Application.GVL_A09_Auto.bError[34]" , "A09测试NG抛料站NG料盒4缺失" , true),
    103. 

  103. 

  104.             ("Application.GVL_A10_Auto.bError[1]" , "A10测试NG抛料站NG抛料失败，需要手动清除材料" , true),
    105. 

  105.             ("Application.GVL_A10_Auto.bError[2]" , "A10测试NG抛料站NG抛料站材料缺失报警" , true),
    106. 

  106.             ("Application.GVL_A10_Auto.bError[25]" , "A10测试NG抛料站NG料盒1满料" , true),
    107. 

  107.             ("Application.GVL_A10_Auto.bError[26]" , "A10测试NG抛料站NG料盒2满料" , true),
    108. 

  108.             ("Application.GVL_A10_Auto.bError[27]" , "A10测试NG抛料站NG料盒3满料" , true),
    109. 

  109.             ("Application.GVL_A10_Auto.bError[28]" , "A10测试NG抛料站NG料盒4满料" , true),
    110. 

  110.             ("Application.GVL_A10_Auto.bError[31]" , "A10测试NG抛料站NG料盒1缺失" , true),
    111. 

  111.             ("Application.GVL_A10_Auto.bError[32]" , "A10测试NG抛料站NG料盒2缺失" , true),
    112. 

  112.             ("Application.GVL_A10_Auto.bError[33]" , "A10测试NG抛料站NG料盒3缺失" , true),
    113. 

  113.             ("Application.GVL_A10_Auto.bError[34]" , "A10测试NG抛料站NG料盒4缺失" , true),
    114. 

  114. 

  115.             ("Application.GVL_A11_Auto.bError[1]" , "A11定位站1材料未取走报警" , true),
    116. 

  116.             ("Application.GVL_A11_Auto.bError[2]" , "A11定位站1材料缺失报警" , true),
    117. 

  117. 

  118.             ("Application.GVL_A15_Auto.b热测站异常[1]" , "A15热测机返回EOT超时报警" , true),
    119. 

  119.             ("Application.GVL_A15_Auto.b热测站异常[11]" , "A15热测站测试机返回Bin结果异常" , true),
    120. 

  120.             ("Application.GVL_A15_Auto.b热测站异常[100]" , "A15热测盘卡料，使能断开" , true),
    121. 

  121.             ("Application.GVL_A15_Auto.b热测盘可以运行" , "热测盘异常，检查热测盘是否卡料，复位报警后点击“热测盘定位”按键解除异常" , false),
    122. 

  122.             ("Application.GVL_A15_Auto.b温度异常[1]" , "热测盘温控器1温度异常" , true),
    123. 

  123.             ("Application.GVL_A15_Auto.b温度异常[2]" , "热测盘温控器2温度异常" , true),
    124. 

  124.             ("Application.GVL_A15_Auto.b温度异常[3]" , "热测盘温控器3温度异常" , true),
    125. 

  125.             ("Application.GVL_A15_Auto.b温度异常[4]" , "热测盘温控器4温度异常" , true),
    126. 

  126. 

  127. 

  128. 

  129.             ("Application.GVL_A20_Auto.bError[1]" , "A20降温站材料未取走报警" , true),
    130. 

  130.             ("Application.GVL_A20_Auto.bError[2]" , "A20降温站材料缺失报警" , true),
    131. 

  131. 

  132.             ("Application.GVL_A21_Auto.bError[1]" , "A21降温站材料未取走报警" , true),
    133. 

  133.             ("Application.GVL_A21_Auto.bError[2]" , "A21降温站材料缺失报警" , true),
    134. 

  134. 

  135.             ("Application.GVL_A22_Auto.bError[1]" , "A22热测NG抛料站NG抛料失败，需要手动清除材料" , true),
    136. 

  136.             ("Application.GVL_A22_Auto.bError[2]" , "A22热测NG抛料站NG抛料站材料缺失报警" , true),
    137. 

  137.             ("Application.GVL_A22_Auto.bError[25]" , "A22热测NG抛料站NG料盒1满料" , true),
    138. 

  138.             ("Application.GVL_A22_Auto.bError[26]" , "A22热测NG抛料站NG料盒2满料" , true),
    139. 

  139.             ("Application.GVL_A22_Auto.bError[27]" , "A22热测NG抛料站NG料盒3满料" , true),
    140. 

  140.             ("Application.GVL_A22_Auto.bError[28]" , "A22热测NG抛料站NG料盒4满料" , true),
    141. 

  141.             ("Application.GVL_A22_Auto.bError[31]" , "A22热测NG抛料站NG料盒1缺失" , true),
    142. 

  142.             ("Application.GVL_A22_Auto.bError[32]" , "A22热测NG抛料站NG料盒2缺失" , true),
    143. 

  143.             ("Application.GVL_A22_Auto.bError[33]" , "A22热测NG抛料站NG料盒3缺失" , true),
    144. 

  144.             ("Application.GVL_A22_Auto.bError[34]" , "A22热测NG抛料站NG料盒4缺失" , true),
    145. 

  145. 

  146.             ("Application.GVL_A23_Auto.bError[1]" , "A23降温站材料未取走报警" , true),
    147. 

  147.             ("Application.GVL_A23_Auto.bError[2]" , "A23降温站材料缺失报警" , true),
    148. 

  148. 

  149.             ("Application.GVL_A24_Auto.b镭射打标站异常[1]" , "A24镭射盘材料缺失报警" , true),
    150. 

  150.             ("Application.GVL_A24_Auto.b镭射打标站异常[2]" , "A24镭射盘材料未取走报警" , true),
    151. 

  151.             ("Application.GVL_A24_Auto.b镭射打标站异常[3]" , "A24镭射盘下料材料丢失报警，解除报警后按运行启动" , true),
    152. 

  152.             ("Application.GVL_A24_Auto.b镭射打标站异常[10]" , "A24镭射盘CCD返回EOT结果超时" , true),
    153. 

  153.             ("Application.GVL_A24_Auto.b镭射打标站异常[20]" , "A24镭射盘打标机返回EOT结果超时" , true),
    154. 

  154.             
    155. 

  155.             ("Application.GVL_A26_Auto.bError[1]" , "A26定位站2材料未取走报警" , true),
    156. 

  156.             ("Application.GVL_A26_Auto.bError[2]" , "A26定位站2材料缺失报警" , true),
    157. 

  157. 

  158.             ("Application.GVL_A27_Auto.bError[1]" , "A27测试站5材料未取走报警" , true),
    159. 

  159.             ("Application.GVL_A27_Auto.bError[2]" , "A27测试站5材料缺失报警" , true),
    160. 

  160.             ("Application.GVL_A27_Auto.bError[10]" , "A27测试站5测试机返回EOT超时" , true),
    161. 

  161.             ("Application.GVL_A27_Auto.bError[11]" , "A27测试站5返回Bin结果异常" , true),
    162. 

  162. 

  163.             ("Application.GVL_A28_Auto.bError[1]" , "A28转向站2材料未取走报警" , true),
    164. 

  164.             ("Application.GVL_A28_Auto.bError[2]" , "A28转向站2材料缺失报警" , true),
    165. 

  165. 

  166.             ("Application.GVL_A29_Auto.bError[10]" , "A29 3D检测站CCD返回EOT超时报警" , true),
    167. 

  167. 

  168.             ("Application.GVL_A30_Auto.bError[1]" , "A30 3D检测NG抛料站NG抛料失败，需要手动清除材料" , true),
    169. 

  169.             ("Application.GVL_A30_Auto.bError[2]" , "A30 3D检测NG抛料站NG抛料站材料缺失报警" , true),
    170. 

  170.             ("Application.GVL_A30_Auto.bError[25]" , "A30 3D检测NG抛料站NG料盒1满料" , true),
    171. 

  171.             ("Application.GVL_A30_Auto.bError[26]" , "A30 3D检测NG抛料站NG料盒2满料" , true),
    172. 

  172.             ("Application.GVL_A30_Auto.bError[27]" , "A30 3D检测NG抛料站NG料盒3满料" , true),
    173. 

  173.             ("Application.GVL_A30_Auto.bError[28]" , "A30 3D检测NG抛料站NG料盒4满料" , true),
    174. 

  174.             ("Application.GVL_A30_Auto.bError[31]" , "A30 3D检测NG抛料站NG料盒1缺失" , true),
    175. 

  175.             ("Application.GVL_A30_Auto.bError[32]" , "A30 3D检测NG抛料站NG料盒2缺失" , true),
    176. 

  176.             ("Application.GVL_A30_Auto.bError[33]" , "A30 3D检测NG抛料站NG料盒3缺失" , true),
    177. 

  177.             ("Application.GVL_A30_Auto.bError[34]" , "A30 3D检测NG抛料站NG料盒4缺失" , true),
    178. 

  178. 

  179.             ("Application.GVL_A31_Auto.bError[1]" , "A31封装前定位1材料未取走报警" , true),
    180. 

  180.             ("Application.GVL_A31_Auto.bError[2]" , "A31封装前定位2材料缺失报警" , true),
    181. 

  181. 

  182.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[1]" , "A33载带丢失" , true),
    183. 

  183.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[2]" , "A33盖膜丢失" , true),
    184. 

  184.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[3]" , "A33加温过高" , true),
    185. 

  185.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[4]" , "A33加温过低" , true),
    186. 

  186.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[5]" , "A33封合罩丢失" , true),
    187. 

  187.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[6]" , "A33叠料报警" , true),
    188. 

  188.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[7]" , "A33封装站整租未到位" , true),
    189. 

  189.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[8]" , "A33盖膜余量少于两卷，及时更换" , true),
    190. 

  190.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[9]" , "A33载带余量少于两卷，及时更换" , true),
    191. 

  191.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[10]" , "A33模式2上下吸嘴有残料" , true),
    192. 

  192.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[11]" , "A33上下吸嘴料件丢失" , true),
    193. 

  193.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[12]" , "A33默认模式上下吸嘴有残料" , true),
    194. 

  194.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[13]" , "A33印字复检CCD未通过" , true),
    195. 

  195.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[14]" , "A33空料检测检出异料" , true),
    196. 

  196.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[15]" , "空料检测检出空料" , true),
    197. 

  197.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[16]" , "A33走带时封合轴位置异常" , true),
    198. 

  198.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[17]" , "A33走带时切刀位置异常，检查切刀电磁阀信号" , true),
    199. 

  199.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[18]" , "A33压痕画像CCD未通过" , true),
    200. 

  200.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[19]" , "A33切刀位置异常，不在初始位置" , true),
    201. 

  201.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[20]" , "A33切刀伸出未到位" , true),
    202. 

  202.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[21]" , "A33走带对位失败" , true),
    203. 

  203.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[22]" , "A33封合气缸到位超时" , true),
    204. 

  204.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[23]" , "A33印字复检相机超时" , true),
    205. 

  205.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[24]" , "A33压痕画像相机超时" , true),
    206. 

  206.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[25]" , "A33走带轴移动过大无法自动复位，需手动回记忆位" , true),
    207. 

  207.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[30]" , "A33 CCD1发送EOT后返回结果超时" , true),
    208. 

  208.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[31]" , "A33 CCD2发送EOT后返回结果超时" , true),
    209. 

  209.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[32]" , "A33上料吸嘴与上料格同时有料，需手动抛掉其中一个" , true),
    210. 

  210.             ("Application.Var_Auto_A33_Encapsulation1.b_Error[33]" , "A33上料吸嘴取料连续失败" , true),
    211. 

  211. 

  212.             ("Application.GVL_A35_Auto.bError[1]" , "A35封装前定位2材料未取走报警" , true),
    213. 

  213.             ("Application.GVL_A35_Auto.bError[2]" , "A35封装前定位2材料缺失报警" , true),
    214. 

  214. 

  215.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[1]" , "A37载带丢失" , true),
    216. 

  216.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[2]" , "A37盖膜丢失" , true),
    217. 

  217.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[3]" , "A37加温过高" , true),
    218. 

  218.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[4]" , "A37加温过低" , true),
    219. 

  219.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[5]" , "A37封合罩丢失" , true),
    220. 

  220.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[6]" , "A37叠料报警" , true),
    221. 

  221.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[7]" , "A37封装站整租未到位" , true),
    222. 

  222.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[8]" , "A37盖膜余量少于两卷，及时更换" , true),
    223. 

  223.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[9]" , "A37载带余量少于两卷，及时更换" , true),
    224. 

  224.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[10]" , "A37模式2上下吸嘴有残料" , true),
    225. 

  225.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[11]" , "A37上下吸嘴料件丢失" , true),
    226. 

  226.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[12]" , "A37默认模式上下吸嘴有残料" , true),
    227. 

  227.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[13]" , "A37印字复检CCD未通过" , true),
    228. 

  228.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[14]" , "A37空料检测检出异料" , true),
    229. 

  229.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[15]" , "A37空料检测检出空料" , true),
    230. 

  230.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[16]" , "A37走带时封合轴位置异常" , true),
    231. 

  231.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[17]" , "A37走带时切刀位置异常，检查切刀电磁阀信号" , true),
    232. 

  232.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[18]" , "A37压痕画像CCD未通过" , true),
    233. 

  233.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[19]" , "A37切刀位置异常，不在初始位置" , true),
    234. 

  234.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[20]" , "A37切刀伸出未到位" , true),
    235. 

  235.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[21]" , "A37走带对位失败" , true),
    236. 

  236.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[22]" , "A37封合气缸到位超时" , true),
    237. 

  237.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[23]" , "A37印字复检相机超时" , true),
    238. 

  238.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[24]" , "A37压痕画像相机超时" , true),
    239. 

  239.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[25]" , "A37走带轴移动过大无法自动复位，需手动回记忆位" , true),
    240. 

  240.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[30]" , "A37 CCD1发送EOT后返回结果超时" , true),
    241. 

  241.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[31]" , "A37 CCD2发送EOT后返回结果超时" , true),
    242. 

  242.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[32]" , "A37上料吸嘴与上料格同时有料，需手动抛掉其中一个" , true),
    243. 

  243.             ("Application.Var_Auto_A37_Encapsulation2.b_Error[33]" , "A37上料吸嘴取料连续失败" , true),
    244. 

  244. 

  245.             ("Application.Var_Auto_A39_OverflowBox.b_Error[1]" , "A39料盒丢失" , true),
    246. 

  246.             ("Application.Var_Auto_A39_OverflowBox.b_Error[2]" , "A39抛料超时" , true),
    247. 

  247. 

  248. 

  249.             ("Application.PieceDate.ar_b低良报警[1]" , "测试站1良率过低" , true),
    250. 

  250.             ("Application.PieceDate.ar_b低良报警[2]" , "测试站2良率过低" , true),
    251. 

  251.             ("Application.PieceDate.ar_b低良报警[3]" , "测试站3良率过低" , true),
    252. 

  252.             ("Application.PieceDate.ar_b低良报警[4]" , "测试站4良率过低" , true),
    253. 

  253.             ("Application.PieceDate.ar_b低良报警[5]" , "测试站5良率过低" , true),
    254. 

  254.             ("Application.PieceDate.ar_b低良报警[6]" , "热测良率过低" , true),
    255. 

  255.             ("Application.PieceDate.ar_b低良报警[7]" , "镭射打标CCD良率过低" , true),
    256. 

  256.             ("Application.PieceDate.ar_b低良报警[8]" , "3D检测良率过低" , true),
    257. 

  257.             ("Application.PieceDate.ar_b低良报警[9]" , "封装1CCD1良率过低" , true),
    258. 

  258.             ("Application.PieceDate.ar_b低良报警[10]" , "封装1CCD2良率过低" , true),
    259. 

  259.             ("Application.PieceDate.ar_b低良报警[11]" , "封装2CCD1良率过低" , true),
    260. 

  260.             ("Application.PieceDate.ar_b低良报警[12]" , "封装2CCD2良率过低" , true),
    261. 

  261. 

  262.             ("Application.Var_state.b吸嘴寿命报警[1]" , "吸嘴1使用寿命到达" , true),
    263. 

  263.             ("Application.Var_state.b吸嘴寿命报警[2]" , "吸嘴2使用寿命到达" , true),
    264. 

  264.             ("Application.Var_state.b吸嘴寿命报警[3]" , "吸嘴3使用寿命到达" , true),
    265. 

  265.             ("Application.Var_state.b吸嘴寿命报警[4]" , "吸嘴4使用寿命到达" , true),
    266. 

  266.             ("Application.Var_state.b吸嘴寿命报警[5]" , "吸嘴5使用寿命到达" , true),
    267. 

  267.             ("Application.Var_state.b吸嘴寿命报警[6]" , "吸嘴6使用寿命到达" , true),
    268. 

  268.             ("Application.Var_state.b吸嘴寿命报警[7]" , "吸嘴7使用寿命到达" , true),
    269. 

  269.             ("Application.Var_state.b吸嘴寿命报警[8]" , "吸嘴8使用寿命到达" , true),
    270. 

  270.             ("Application.Var_state.b吸嘴寿命报警[9]" , "吸嘴9使用寿命到达" , true),
    271. 

  271.             ("Application.Var_state.b吸嘴寿命报警[10]" , "吸嘴10使用寿命到达" , true),
    272. 

  272.             ("Application.Var_state.b吸嘴寿命报警[11]" , "吸嘴11使用寿命到达" , true),
    273. 

  273.             ("Application.Var_state.b吸嘴寿命报警[12]" , "吸嘴12使用寿命到达" , true),
    274. 

  274.             ("Application.Var_state.b吸嘴寿命报警[13]" , "吸嘴13使用寿命到达" , true),
    275. 

  275.             ("Application.Var_state.b吸嘴寿命报警[14]" , "吸嘴14使用寿命到达" , true),
    276. 

  276.             ("Application.Var_state.b吸嘴寿命报警[15]" , "吸嘴15使用寿命到达" , true),
    277. 

  277.             ("Application.Var_state.b吸嘴寿命报警[16]" , "吸嘴16使用寿命到达" , true),
    278. 

  278.             ("Application.Var_state.b吸嘴寿命报警[17]" , "吸嘴17使用寿命到达" , true),
    279. 

  279.             ("Application.Var_state.b吸嘴寿命报警[18]" , "吸嘴18使用寿命到达" , true),
    280. 

  280.             ("Application.Var_state.b吸嘴寿命报警[19]" , "吸嘴19使用寿命到达" , true),
    281. 

  281.             ("Application.Var_state.b吸嘴寿命报警[20]" , "吸嘴20使用寿命到达" , true),
    282. 

  282.             ("Application.Var_state.b吸嘴寿命报警[21]" , "吸嘴21使用寿命到达" , true),
    283. 

  283.             ("Application.Var_state.b吸嘴寿命报警[22]" , "吸嘴22使用寿命到达" , true),
    284. 

  284.             ("Application.Var_state.b吸嘴寿命报警[23]" , "吸嘴23使用寿命到达" , true),
    285. 

  285.             ("Application.Var_state.b吸嘴寿命报警[24]" , "吸嘴24使用寿命到达" , true),
    286. 

  286.             ("Application.Var_state.b吸嘴寿命报警[25]" , "吸嘴25使用寿命到达" , true),
    287. 

  287.             ("Application.Var_state.b吸嘴寿命报警[26]" , "吸嘴26使用寿命到达" , true),
    288. 

  288.             ("Application.Var_state.b吸嘴寿命报警[27]" , "吸嘴27使用寿命到达" , true),
    289. 

  289.             ("Application.Var_state.b吸嘴寿命报警[28]" , "吸嘴28使用寿命到达" , true),
    290. 

  290.             ("Application.Var_state.b吸嘴寿命报警[29]" , "吸嘴29使用寿命到达" , true),
    291. 

  291.             ("Application.Var_state.b吸嘴寿命报警[30]" , "吸嘴30使用寿命到达" , true),
    292. 

  292.             ("Application.Var_state.b吸嘴寿命报警[31]" , "吸嘴31使用寿命到达" , true),
    293. 

  293.             ("Application.Var_state.b吸嘴寿命报警[32]" , "吸嘴32使用寿命到达" , true),
    294. 

  294.             ("Application.Var_state.b吸嘴寿命报警[33]" , "吸嘴33使用寿命到达" , true),
    295. 

  295.             ("Application.Var_state.b吸嘴寿命报警[34]" , "吸嘴34使用寿命到达" , true),
    296. 

  296.             ("Application.Var_state.b吸嘴寿命报警[35]" , "吸嘴35使用寿命到达" , true),
    297. 

  297.             ("Application.Var_state.b吸嘴寿命报警[36]" , "吸嘴36使用寿命到达" , true),
    298. 

  298.             ("Application.Var_state.b吸嘴寿命报警[37]" , "吸嘴37使用寿命到达" , true),
    299. 

  299.             ("Application.Var_state.b吸嘴寿命报警[38]" , "吸嘴38使用寿命到达" , true),
    300. 

  300.             ("Application.Var_state.b吸嘴寿命报警[39]" , "吸嘴39使用寿命到达" , true),
    301. 

  301.             ("Application.Var_state.b吸嘴寿命报警[40]" , "吸嘴40使用寿命到达" , true),
    302. 

  302.         };
    303. 

  303.     }
    304. 

  304.     public class AlarmDisplay
    305. 

  305.     {
    306. 

  306.         public int Id { get; set; }
    307. 

  307.         public int RowNumber { get; set; }
    308. 

  308.         public DateTime Timestamp { get; set; }
    309. 

  309.         public string Username { get; set; }
    310. 

  310.         public string AlarmMessage { get; set; }
    311. 

  311.         public string AlarmType { get; set; } // 显示为 "Error", "Warning" 等
    312. 

  312.     }
    313. 

  313.     public class PairedAlarm
    314. 

  314.     {
    315. 

  315.         public string Username { get; set; }
    316. 

  316.         public string AlarmMessage { get; set; }
    317. 

  317.         public DateTime StartTime { get; set; }
    318. 

  318.         public DateTime EndTime { get; set; } // 若未清除，则为 DateTime.MinValue
    319. 

  319.         public string Type { get; set; } // 显示为 "Error", "Warning" 等
    320. 

  320.         // 辅助属性（可选）
    321. 

  321.         public bool IsCleared => EndTime != DateTime.MinValue;
    322. 

  322. 

  323.         public static List<PairedAlarm> PairAlarms(List<AlarmDisplay> logs)
    324. 

  324.         {
    325. 

  325.             if (logs == null || !logs.Any())
    326. 

  326.                 return new List<PairedAlarm>();
    327. 

  327. 

  328.             var grouped = logs.GroupBy(x => x.AlarmMessage);
    329. 

  329.             var result = new List<PairedAlarm>();
    330. 

  330. 

  331.             foreach (var group in grouped)
    332. 

  332.             {
    333. 

  333.                 DateTime pendingStart = DateTime.MinValue; // 用 MinValue 表示“无 pending”
    334. 

  334.                 string alarmType=null;
    335. 

  335.                 foreach (var log in group.OrderBy(x => x.Timestamp))
    336. 

  336.                 {
    337. 

  337.                     if (log.AlarmType != AlarmType.Cleared.ToString())
    338. 

  338.                     {
    339. 

  339.                         // 只有当前没有 pending 发生事件时，才记录新的开始
    340. 

  340.                         if (pendingStart == DateTime.MinValue)
    341. 

  341.                         {
    342. 

  342.                             pendingStart = log.Timestamp;
    343. 

  343.                             alarmType = log.AlarmType;
    344. 

  344.                         }
    345. 

  345.                         // 否则忽略重复“发生”
    346. 

  346.                     }
    347. 

  347.                     else if (log.AlarmType == AlarmType.Cleared.ToString())
    348. 

  348.                     {
    349. 

  349.                         if (pendingStart != DateTime.MinValue)
    350. 

  350.                         {
    351. 

  351.                             // 配对成功
    352. 

  352.                             result.Add(new PairedAlarm
    353. 

  353.                             {
    354. 

  354.                                 AlarmMessage = group.Key,
    355. 

  355.                                 StartTime = pendingStart,
    356. 

  356.                                 EndTime = log.Timestamp,
    357. 

  357.                                 Type=alarmType
    358. 

  358.                                 
    359. 

  359.                             });
    360. 

  360.                             pendingStart = DateTime.MinValue; // 清空 pending
    361. 

  361.                         }
    362. 

  362.                         // 否则：清除前无发生，忽略（或记录警告）
    363. 

  363.                     }
    364. 

  364.                 }
    365. 

  365. 

  366.                 // 循环结束后，若仍有 pending，说明未清除
    367. 

  367.                 if (pendingStart != DateTime.MinValue)
    368. 

  368.                 {
    369. 

  369.                     result.Add(new PairedAlarm
    370. 

  370.                     {
    371. 

  371.                         AlarmMessage = group.Key,
    372. 

  372.                         StartTime = pendingStart,
    373. 

  373.                         EndTime = DateTime.Now // 表示未清除
    374. 

  374.                     });
    375. 

  375.                 }
    376. 

  376.             }
    377. 

  377. 

  378.             return result.OrderBy(x => x.StartTime).ThenBy(x => x.AlarmMessage).ToList();
    379. 

  379.         }
    380. 

  380.     }
    381. 

  381. 

  382. 

  383. }
    384.